My Account  |  0 item(s)    View Cart

3" Radflo Nisstec Extended Travel Kit (05+ Frontier)

review
0
0
5
Your Price: $2,185.99
Retail Price:$2,300.99
Your Savings:$115.00(5%)
Part Number:N-3RAD-KITF

Choose Options

Rear Lift Options
Rear Shocks
Front Cam Bolt Kit
Upper Control Arms
Front Coilover Spring Rate
Front Spring Color
This is a complete 3" front and rear suspension lift for your Frontier. 
Radflo 2.0 Extended Travel coilovers are fully adjustable from 0-2.5" of lift coupled with our 1" top plate spacer allows up to 3.5" of front lift to be run (best ride quality is 3" of front lift or below)

Included in Kit (choose in the drop downs below for more options):

 Included in Kit (choose in the drop downs below for more options):
Radflo Extended travel 2.0 coilovers (2ea)
- Completely rebuildable heavy duty 2.0" shock body with 7/8" piston provides a more controlled ride on and off road.

- Fully adjustable up to 2.5" of front lift
- Comes standard with a 600lb Eibach Springs- Custom light and HD springs available, see below
- Ships assembled for ease of install
- Spanner wrench included
This is one of the best coilover setups on the market today!!

*Front coilovers available in 2.0" shock bodies, 2.5" OR 2.5" Remote Res shock bodies. The larger the shock body the more oil. The more oil the cooler the shocks will stay. If you run higher speeds offroad we recommend 2.5" coilovers or 2.5" Remote res coilovers for the coolest running shock

We recommend the following spring rates for your Nissan
-500 lb. springs- Great for 2wd stock front weight Xterra’s and 2wd- 2 door and extra cab Frontier’s. Also work great for a plush ride on 4x4 Xterra’s with no front weight
-550 lb. springs- All stock weight 4x4 Xterra’s and Frontier’s. Good for 2wd models with skids, sliders, and tube bumpers.
-600 lb. springs- All models with plate front bumpers, lighter 8000lb winch W/syn line, skids, and sliders
-650 lb. springs- All models with plate bumpers, all of the above with some extra weight
-700 lb. springs- Only for heavy oversized bumpers, heavy 12000 lb. winch W/steel cable, heavy skids, heavy

Please Call If You Are Unsure What Spring Rate To Select.

 - (2) Extended travel SPC upper control arms (comes standard in the kit
- (1) Spanner wrench for coil over adjustment
- (2) NissTec rear 2” lift Add-A-Leafs w/ hardware- This custom longer rear AAL provides a great ride on and off-road, all while adding the ability to carry some extra weight on the back of your Frontier
OR
Old Man Emu CS150 Med duty leaf springs
OR
Old Man Emu CS151 HD rear leaf springs (400+ lbs consistant rear weight always on the back or bed of your truck)
AND
- (2) Nisstec 1" Rear Lift Block Kit
- (2) Front braided stainless longer brake lines
- (2) Rear braided stainless longer brake lines
- (2) Rear sway bar relocation brackets
- (4) New Longer zinc plated rear Ubolts
- (2) Bilstein 5100 series nitrogen charged rear shocks
OR
- (2) Radflo Emulsion 2.0 rear shocks.

 *Fronter Coilover notes:
We preset all Radflo coilovers at about 2" of front lift height with our 1" top plate spacer already installed. These presets are based off a brand new stock weight 4x4 Frontier. If you own a 2wd Frontier or have a heavy front bumper and/or winch installed, you may have to raise the coilovers or lower them. Please see the last page of our install instructions for more info on how to adjust your coilovers. Once your kits is fully installed and you have driven your Xterra around a block or two. We highly recommend parking on level ground and measuring your front end. Measure from the center of your hub (wheel) straight up to the bottom lip of the fender. If this measurement is greater than 23", you must lower your coilover!! Running your coilovers too high will cause premature shock failure and will void your warranty. Plus they will ride poorly

* Rear Lift Option notes:
** Please note additional shipping charges to the lower 48 states are built into the add-on price of OME leaf packs. If shipping to Hawaii or Alaska, we will contact you to confirm any additional shipping charges **

 

We also offer custom built to order rear Alcan or Deaver leaf packs. Please call or email us for pricing

 

 If your vehicle does not have adjustable cam bolts installed, you WILL NEED THEM!! Nissan only installed adjustable cam bolts in some 2005 year Froniters. Cam Bolts allow +/- 2 degrees camber/caster adjustment and are a must with this kit for proper alignment!!

Related Items

 
 
 
 

Recently Viewed Items